Spapilot
Take full control of your spa from your phone. Spapilot connects to your existing control system and learns your habits, saving up to 80% on heating costs automatically.
Based on Zavepower's own analysis and modelling: up to 80% with the Planner on the most volatile spot days; typically 40 to 60% on a spot plan. Actual savings vary by your electricity plan, spa and location.
Features
Everything you need
Spapilot gives you complete control over your spa, from anywhere in the world.
Remote Control
Control temperature, jets, lighting, and filtration from the Spapilot app. iOS and Android.
Energy Savings
Intelligent scheduling and learning algorithms cut your heating costs by up to 80%.
Planner
Set heating schedules so your spa is always ready when you want it, never paying to heat when you're away.
Energy Insights
Live temperature, filter status, and system health data available in the app at all times.
Easy Installation
Easy to fit, or have it fitted. Connects to your existing spa control board in minutes, no technical knowledge needed.
OTA Updates
Firmware updates delivered automatically over the air. Your Spapilot gets better without any effort from you.
How It Works
Up and running in 15 minutes
Plug In
Connect Spapilot to your existing control board. No tools required, easy to fit in minutes.
Download the App
iOS or Android. Connect via WiFi in under 5 minutes. No technical knowledge needed.
Take Control
Temperature, jets, lighting, energy modes. Everything in your pocket, at home or anywhere in the world.
Compatibility
Works with most major spa brands
Compatible with most major spa brands worldwide. Over 10 million spas use the control systems we support. Check if your spa works, it probably does.
Compatible with over 10 million spa systems worldwide
24 hours
A day with Spapilot
Watch what Spapilot does automatically, from midnight to midnight. It works while you sleep, saves while you work, and prepares while you relax.
Price update
Fetches hourly electricity prices for your region.
€0.03/kWh, below your limit
Heating plan calculated
Based on prices, target temperature, and your schedule, Spapilot builds an optimal heating plan for the next 24 hours.
Heating started
Electricity is cheap. Spapilot starts heating to reach your target before morning.
38.2°C → 39.0°C
Frost protection active
Outside temperature: 2°C. Monitoring engaged, if water drops below 5°C, emergency heating activates.
39.0°C, heater off
Target temperature reached. Heater turns off automatically. Saved €1.20 vs continuous heating.
Session cost: €0.34
Filter cycle started
Spa controller runs scheduled filtration. Spapilot monitors but does not interfere.
Duration: 3 hours
Temperature drift check
Water cooled to 38.4°C. Within Comfort range (±1.0°C), no heating needed yet.
Price spike detected
Electricity jumped to €0.18/kWh, above your €0.08 limit. Heating blocked until prices drop.
€0.18/kWh, 3x your limit
Energy report updated
Overnight consumption: 2.1 kWh. Cost so far: €0.34.
Filtration complete
3-hour filter cycle finished. Water circulation done.
Push notification
Morning summary sent to your phone: 'Spa is 38.1°C. Next heating at 12:00 (cheap solar window).'
Cheap electricity detected
Solar production peaks. Prices drop to €0.02/kWh. Spapilot activates heating.
€0.02/kWh, cheapest of the day
Pre-heating for tonight
Your schedule shows spa use at 19:00. Heating now saves money vs heating at peak hours.
39.0°C, ready
Pre-heated for tonight using cheap midday electricity. Session cost: €0.28.
Same heat at 18:00 would cost €1.80
Evening plan confirmed
Spa will be 39.0°C at 19:00. No additional heating needed, already warm.
Price forecast loaded
Tomorrow's prices available. Spapilot begins planning the next 24 hours.
Quick boost
Water is 38.6°C. Short 10-minute heating to reach exactly 39.0°C before you arrive.
Boost cost: €0.05
Ready for you
39.0°C. Jets, lighting, and heating all controllable from the app. Enjoy.
Active monitoring
Temperature monitored every 30 seconds during use. Auto-adjusts if it drops.
Cover closed
Spapilot detects cover on. Switches to Economy mode for the night.
Standby temp: 36°C
Night mode active
Heating disabled until prices drop below limit. Frost protection stays active.
Daily summary
Today: 3 heating sessions, 1 filtration cycle. Total: 4.2 kWh. Cost: €0.73.
Without Spapilot: ~€3.40. Saved €2.67 (78%)
Tomorrow preview
Cheap window at 01:00-05:00 and 12:00-14:00. Plan ready.
Learn More
Everything about Spapilot
Remote control
Adjust temperature, jets, lighting, and filtration from anywhere via the Spapilot app on iOS or Android.
Energy savings
Intelligent scheduling and multiple heating modes lower your heating costs by up to 80% depending on your usage pattern.
Easy to fit
Connects to your Balboa or Gecko control board in minutes. Easy to fit, or have it fitted, no rewiring needed.
Planner
Set heating schedules so your spa is always ready when you want it. Never pay to heat an empty tub.
Energy Insights
Live temperature, filter status, and system health data available in the app at all times.
OTA updates
Firmware delivered automatically over the air. Your Spapilot gets better without any effort from you.
Based on Zavepower's own analysis and modelling: up to 80% with the Planner on the most volatile spot days; typically 40 to 60% on a spot plan. Actual savings vary by your electricity plan, spa and location.
Zavepower does not maintain any commercial partnership with Balboa Water Group or Gecko Alliance. References are provided exclusively to elucidate technical compatibility.
Ready to get started
Smarter spa control starts today
Join 500+ spa owners already saving energy and enjoying effortless control.
- Easy to fit, or have it fitted
- Compatible with most major spa brands
- Up to 80% on heating costs
- OTA updates automatically
- 30-day return policy
Based on Zavepower's own analysis and modelling: up to 80% with the Planner on the most volatile spot days; typically 40 to 60% on a spot plan. Actual savings vary by your electricity plan, spa and location.