Power on and basic check

Step 5 

Goal of this step
Make sure your spa and Spapilot start correctly after the connection to the control board.
 
1. Turn the power back on
  • Turn the main breaker for the spa back on.
  • Wait 30–60 seconds while the spa control system boots.
2. Check the spa control panel
Confirm that:
  • the spa control panel turns on as usual,
  • no new or unexpected error codes are shown,
  • pumps, lights or display do not behave in a strange way.
If you see error codes or abnormal behaviour, turn the power off again and contact your spa dealer or Spapilot support before you continue.
 
3. Check the Spapilot unit
  • Make sure the Spapilot box shows the wi-fi "Spapilot Setup Wi-Fi"
  • Don't connect to Spapilots Wi-Fi at this stage.

 

Step 6 – Prepare for app pairing

Goal of this step
Make sure everything is ready so the app can find and connect to your Spapilot.
 
  • Confirm that your Wi‑Fi network is available and stable at the spa location with your mobile phone. ( Spapilot need a dbm value of -75 or lower to work properly)
  • Have your Wi‑Fi name (SSID) and password ready.
You are now ready for the next part:
Step is done